If your car windshield has a chip in it, you may want to get it fixed as soon as possible. If ignored, this tiny chip may expand and increase your chances of car windshield replacement done. Once the first layer of the windshield is cracked, the damage may spread. If you want to save money in the long run, we suggest that you repair the glass as soon as possible. You can do it yourself or get help from a professional. You can buy windshield repair kits from a nearby auto parts store if you want to go the DIY route. Given below are some of the tips that can help you perform the repair yourself.
1. For the do-it-yourself job, you need the following things:
- Razor blades
- Plastic curbing tab
- Pit filler
- Repair resin
- Injector and bridge
- A mirror to be placed on the inside
- A Dremel tool
2. Start the Repair Process
First of all, you should prepare the windshield for repair. You can use an alcohol pad for cleaning the area. Your next move is to hook the mirror on the internal part of the glass. It should be centered on the chip that needs to be repaired. This will help you monitor the shape from different aspects.
3. Seal the Chip
You may want to center your desired tool on the chip. Basically, you have to seal over the chipped area.
4: Drop Resin
Once you have sealed the chip, your next move is to drop a couple of drops of resin onto the injector area.
5: Inject the Chip
You can use the injector to insert the resin into the chip. After you are done, you may want to let it sit for at least 5 minutes. If your car is sitting in direct sunlight, you may want to keep the area covered. This is important for the resin to cure properly. After 10 minutes, you can take off the bridge.
6: Fill in the Missing Glass
Now, you are almost done with the repair. Your final move is to fill in the tiny pits of the chipped area. This is the area where you may find that a little bit of glass is missing. For a smooth finish, following this step is of paramount importance. You can use your pet filler for this purpose. Once you have filled in the area, you may want to wait for a couple of minutes so that it is completely cured.
7: Scrape Off the Excess Pit filler
You can use a razor blade to scrape off the excess pit filler. Apart from this, you can use nail polish to ensure that the area starts shining once again.
Long story short, you can follow these steps if you want to repair your car windshield yourself. However, if you have not done any type of windshield repair job before, we suggest that you take your car to a professional. After all, you don’t want to end up causing further damage to your vehicle.