Car Stereo Line Output Converter

Line output converter can be defined as a small device that converts high-voltage speaker-level signals to preamp-level signals; which is acceptable to an amp. If u want to connect an amp to your car stereo which doesn’t have a speaker level inputs then it means you need a line output converter to have a preamp outputs. So you can connect your receiver to an amp by converting your receiver’s speaker output into preamp-level signals. It consists of a transformer and (10 to 20 watts) a high-voltage resistor and connects to amp by using RCA patch cable. The amplifier in the head unit is being loaded by the resistor. It has also an adjustable gain feature to pull output.

Most of the line output converters have wire to ground the transformer. When the head unit is “on” the voltage on the output speaker wires, is almost half of the DC battery and changes rapidly when it is “on”. Whereas, when the unit is “off”, the voltage is 0 volt DC. As we already said, that the head unit’s outputs has a large quick increase in DC voltage when the head unit is turned on. The transformer will provide the variation of voltage between the two input terminals. Since the DC voltage increases at the same time on both the input terminals, then the rhythm of the DC is irrecoverable. There are different types of Line Output Converters available in the market but Gizmo Peripheral is remained the industry leader in high quality LOC’s.

There are simple Instructions for the line output converters which need to take in consideration. So connect the audio cable speaker’s leads to the device from the car stereo. The line output converter then trims down all the inwards bound speakers’ level audio signals until the outgoing signals get adjusted to the preamp inputs on the amplifier. An adaptor scosche performs many different applications. It accepts speaker level outputs and converts them to preamp level outputs. It has a fader control feature also that means; we can hook 2 channel amplifier or 4 channel amplifier easily and can not lose any fader control.

Adjustable line output converters helps to convert the radio speaker level output to the lower amplifier RCA level input. Installers use to convert their speaker level stereo to RCA levels with the help of Hi/low adaptors which hooks to an external car stereo amplifier. Hi/low converter with 2 channels and 4 channels are also available with or without adjustments. It is important to note that the match between your car stereo and amplifiers are the same. Adjustable hi/low converters allow to fine tune the hi/low device to match levels in the car and are the most popular in adjustable output converters. There are many adjustable output converters in 2 channels and 4 channels available. For example, Soundgate “LOC A” adjustable high performance Hi/Low adaptor features full DC isolation and handles 40 watts and Soungate “XR4”, this performs dual functions such as to add an aftermarket receiver to a factory amplifier system or to add four channel amplifiers to a factory receiver. This feature can make adjustments on all four channels.

Leave a Reply

Next Post

The Best RV Covers Are Made of Ripstop Fabric

The sporting goods community has a new term when it refers to the material used to make heavy duty tear resistant equipment. That term is ripstop and it refers to 100% woven fabric that is lightweight and has a nylon-threaded interlocking design that resists tearing and ripping. Ripstop fabrics are […]
The Best RV Covers Are Made of Ripstop Fabric

You May Like